HAProxy plugin for Certbot ========================== .. contents:: Table of Contents About ----- This is a certbot plugin for using certbot in combination with a HAProxy setup. Its advantage over using the standalone certbot is that it automatically places certificates in the correct directory and restarts HAProxy afterwards. It should also enable you to very easily do automatic certificate renewal. Furthermore, you can configure HAProxy to handle Boulder's authentication using the HAProxy authenticator of this plugin. It was created for use with `Greenhost`_'s share hosting environment and can be useful to you in the following cases: - If you use HAProxy and have several domains for which you want to enable Let's Encrypt certificates - If you yourself have a shared hosting platform that uses HAProxy to redirect to your client's websites - Actually any case in which you want to automatically restart HAProxy after you request a new certificate. .. _Greenhost: https://greenhost.net This plugin does not configure HAProxy for you, because HAProxy configurations can can vary a great deal. Please read the installation instructions on how to configure HAProxy for use with the plugin. If you have a good idea on how we can implement automatic HAProxy configuration, you are welcome to create a merge request or an issue. Installing: Requirements ------------------------ Currently this plugin has been tested on Debian Jessie, but it will most likely work on Ubuntu 14.04+ too. If you are running Debian Wheezy, you may need to take additional steps during the installation. Thus, the requirements are: - Debian Jessie (or higher) or Ubuntu Trusty (or higher). - Python 2.7 (2.6 is supported by certbot and our goal is to be compatible but it has not been tested yet). - HAProxy 1.6+ (we will configure SNI, which is not strictly required) - Certbot 0.8+ Installing: Getting started --------------------------- The installation below assumes you are running Debian Jessie but it should be almost entirely the same process on Ubuntu. First add the backports repo for Jessie to your apt sources. .. note:: This will not work for Ubuntu, you will need to use another source, check which version comes with your version of Ubuntu, if it is a version below 0.8, you need to find a back port PPA or download certbot from source. .. code:: bash echo "deb http://ftp.debian.org/debian jessie-backports main" >> \ /etc/apt/sources.list.d/jessie-backports.list Now update, upgrade and install some requirements: - **Some utilities:** ``sudo`` ``tcpdump`` ``ufw`` ``git`` ``curl`` ``wget`` - **OpenSSL and CA certificates:** ``openssl`` ``ca-certificates`` - **Build dependencies:** ``build-essential`` ``libffi-dev`` ``libssl-dev`` ``python-dev`` - **Python and related:** ``python`` ``python-setuptools`` - **HAProxy:** ``haproxy`` - **Python dependency managing:** ``pip`` .. code:: bash apt-get update apt-get upgrade -y apt-get install -y \ sudo tcpdump ufw git curl wget \ openssl ca-certificates \ build-essential libffi-dev libssl-dev python-dev \ python python-setuptools \ haproxy easy_install pip pip install --upgrade setuptools We also installed a simple firewall above, but it is not yet configured, let's do that now: .. code:: bash ufw allow ssh ufw allow http ufw allow https ufw default deny incoming ufw --force enable .. warning:: You probably want a little more protection for a production proxy than just this simple firewall, but it's out of the scope of this readme. Now that we have all dependencies, it's time to start a process that may take quite some time to complete. HAProxy comes with a DH parameters file that is considered weak. We need to generate a new dhparams.pem file with a prime of at least ``2048`` bit length, you can also opt for ``3072`` or ``4096``. This can take hours on lower specification hardware, but will still take minutes on faster hardware, especially with ``4096`` bit primes. Run this is in a separate ssh session or use ``screen`` of ``tmux`` to allow this to run in the background. .. code:: bash openssl dhparam -out /opt/certbot/dhparams.pem 2048 Now set a hostname. .. code:: bash echo "[INSERT YOUR HOSTNAME HERE]" > /etc/hostname hostname -F /etc/hostname If you want to run Certbot in an unprivileged mode, keep reading, otherwise, skip to the installation of Certbot. Certbot normally requires access to the ``/etc/`` directory, which is owned by root and therefore, Certbot needs to run as root. However, we don't like it when processes run as root, most especially when they are opening ports on a public network interface.. In order to let Certbot run as an unprivileged user, we will: - Create a ``certbot`` user with a home directory on the system so the automatic renewal of certificates can be run by this user. - Tell Certbot that the working directories are located in ``certbot``'s home directory. - Optionally: add your own user account to the Certbot user's group so you can run Certbot manually. - Allow HAProxy to access the certificates that are generated by Certbot. - Allow the certbot user to restart the HAProxy server. Lastly, to do automatic renewal of certificates, we will create a systemd timer and a service to start at every boot and every 12 hours, at a random time off the day, in order to not collectively DDOS Let's Encrypts service. .. code:: bash useradd -s /bin/bash -m -d /opt/certbot certbot usermod -a -G certbot haproxy # Allow HAProxy access to the certbot certs mkdir -p /opt/certbot/logs mkdir -p /opt/certbot/config mkdir -p /opt/certbot/.config/letsencrypt If you need to use Certbot from your user account, or if you have a daemon running on your proxy server, that configures domains on your proxy, e.g.: in a web hosting environment - you can add those users to the ``certbot`` group. .. code:: bash usermod -a -G certbot [ADD YOUR USER HERE] You will also need to tell your user what the working directory of your Certbot setup is (``/opt/certbot/``). Certbot allows you to create a configuration file with default settings in the users' home dir: ``opt/certbot/.config/letsencrypt/cli.ini``. Besides the working directory. .. code:: bash mkdir -p /opt/certbot/.config/letsencrypt cat < /opt/certbot/.config/letsencrypt/cli.ini work-dir=/opt/certbot/ logs-dir=/opt/certbot/logs/ config-dir=/opt/certbot/config EOF Next time you run Certbot, it will use our new working directory. Now to allow the certbot user to restart HAProxy, put the following in the sudoers file: .. code:: bash cat <> /etc/sudoers %certbot ALL=NOPASSWD: /bin/systemctl restart haproxy EOF Now we haven't done one very essential thing yet, install ``certbot-haproxy``. Since our plugin is in an alpha stage, we did not package it yet. You will need to get it from our Gitlab server. .. code:: bash git clone https://code.greenhost.net/open/certbot-haproxy.git cd ./certbot-haproxy/ sudo pip install ./ Let's Encrypt's CA server will try to contact your proxy on port 80, which is most likely in use for your and/or your customers' websites. So we have configured our plugin to open port ``8000`` to verify control over the domain instead. Therefore we need to forward verification requests on port 80 to port 8000 internally. The sample below contains all that is required for a working load-balancing HAProxy setup that also forwards these verification requests. But it is probably not "copy-paste compatible" with your setup. So you need to piece together a configuration that works for you. .. code:: cat < /etc/haproxy/haproxy.cfg global log /dev/log local0 log /dev/log local1 notice chroot /var/lib/haproxy stats socket /run/haproxy/admin.sock mode 660 level admin stats timeout 30s user haproxy group haproxy daemon # Default ciphers to use on SSL-enabled listening sockets. # Cipher suites chosen by following logic: # - Bits of security 128>256 (weighing performance vs added security) # - Key exchange: EECDH>DHE (faster first) # - Mode: GCM>CBC (streaming cipher over block cipher) # - Ephemeral: All use ephemeral key exchanges # - Explicitly disable weak ciphers and SSLv3 ssl-default-bind-ciphers AES128+AESGCM+EECDH+SHA256:AES128+EECDH:AES128+AESGCM+DHE:AES128+EDH:AES256+AESGCM+EECDH:AES256+EECDH:AES256+AESGCM+EDH:AES256+EDH:-SHA:AES128+AESGCM+EECDH+SHA256:AES128+EECDH:AES128+AESGCM+DHE:AES128+EDH:AES256+AESGCM+EECDH:AES256+EECDH:AES256+AESGCM+EDH:AES256+EDH:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!3DES:!DSS #ssl-default-bind-options no-sslv3 no-tls-tickets force-tlsv12 ssl-default-bind-options no-sslv3 no-tls-tickets ssl-dh-param-file /opt/certbot/dhparams.pem defaults log global mode http option httplog option dontlognull timeout connect 5000 timeout client 50000 timeout server 50000 errorfile 400 /etc/haproxy/errors/400.http errorfile 403 /etc/haproxy/errors/403.http errorfile 408 /etc/haproxy/errors/408.http errorfile 500 /etc/haproxy/errors/500.http errorfile 502 /etc/haproxy/errors/502.http errorfile 503 /etc/haproxy/errors/503.http errorfile 504 /etc/haproxy/errors/504.http frontend http-in # Listen on port 80 bind \*:80 # Listen on port 443 # Uncomment after running certbot for the first time, a certificate # needs to be installed *before* HAProxy will be able to start when this # directive is not commented. # bind \*:443 ssl crt /opt/certbot/haproxy_fullchains/__fallback.pem crt /opt/certbot/haproxy_fullchains # Forward Certbot verification requests to the certbot-haproxy plugin acl is_certbot path_beg -i /.well-known/acme-challenge rspadd Strict-Transport-Security:\ max-age=31536000;\ includeSubDomains;\ preload rspadd X-Frame-Options:\ DENY use_backend certbot if is_certbot # The default backend is a cluster of 4 Apache servers that you need to # host. default_backend nodes backend certbot log global mode http server certbot 127.0.0.1:8000 # You can also configure separate domains to force a redirect from port 80 # to 443 like this: # redirect scheme https if !{ ssl_fc } and [PUT YOUR DOMAIN NAME HERE] backend nodes log global balance roundrobin option forwardfor option http-server-close option httpclose http-request set-header X-Forwarded-Port %[dst_port] http-request add-header X-Forwarded-Proto https if { ssl_fc } option httpchk HEAD / HTTP/1.1\r\nHost:localhost server node1 127.0.0.1:8080 check server node2 127.0.0.1:8080 check server node3 127.0.0.1:8080 check server node4 127.0.0.1:8080 check # If redirection from port 80 to 443 is to be forced, uncomment the next # line. Keep in mind that the bind \*:443 line should be uncommented and a # certificate should be present for all domains redirect scheme https if !{ ssl_fc } EOF systemctl restart haproxy Now you can try to run Certbot with the plugin as the Authenticator and Installer, if you already have websites configured in your HAProxy setup, you may try to install a certificate now. .. code:: bash certbot run --authenticator certbot-haproxy:haproxy-authenticator \ --installer certbot-haproxy:haproxy-installer If you want your ``certbot`` to always use our Installer and Authenticator, you can add this to your configuration file: .. code:: bash cat <> $HOME/.config/letsencrypt/cli.ini authenticator=certbot-haproxy:haproxy-authenticator installer=certbot-haproxy:haproxy-installer EOF If you need to run in unattended mode, there are a bunch of arguments you need to set in order for Certbot to generate a certificate for you. - ``--domain [DOMAIN NAME]`` The domain name you want SSL to be enabled for. - ``--agree-tos`` Tell Certbot you agree with its `TOS`_ - ``--email [EMAIL ADDRESS]`` An e-mail address where issues with certificates can be sent to, as well as changes in the `TOS`_. Or you could supply ``--register-unsafely-without-email`` but this is not recommended. .. _TOS: https://letsencrypt.org/documents/LE-SA-v1.1.1-August-1-2016.pdf After you run certbot successfully once, there will be 2 certificate files in the certificate directory. This is a pre-requisite for HAProxy to start with the ``bind *:443 [..]`` directive in the configuration. You can auto renew certificates by using the systemd service and timer below. They are set to run every 12 hours because certificates that *will not* expire soon will not be replaced but certificates that *will* expire soon, will be replaced in a timely manner. The timer also starts the renewal process 2 minutes after the server boots, this is done so renewal starts immediately after the server has been offline for a long time. .. code:: bash cat < /etc/systemd/system/letsencrypt.timer [Unit] Description=Run Let's Encrypt every 12 hours [Timer] # Time to wait after booting before we run first time OnBootSec=2min # Time between running each consecutive time OnUnitActiveSec=12h Unit=letsencrypt.service [Install] WantedBy=timers.target EOF cat < /etc/systemd/system/letsencrypt.service [Unit] Description=Renew Let's Encrypt Certificates [Service] Type=simple User=certbot ExecStart=/usr/bin/certbot renew -q EOF # Enable the timer and start it, this is not necessary for the service, # since the timer starts it. systemctl enable letsencrypt.timer systemctl start letsencrypt.timer Development: Getting started ----------------------------- In order to run tests against the Let's Encrypt API we will run a Boulder server, which is the exact same server Let's Encrypt is running. The server is started in Virtual Box using Vagrant. To prevent the installation of any components and dependencies from cluttering up your computer there is also a client Virtual Box instance. Both of these machines can be setup and started by running the ``dev_start.sh`` script. This sets up a local boulder server and the letsencrypt client, so don't worry if it takes more than an hour. Vagrant machines ================ The ``dev_start.sh`` script boots two virtual machines. The first is named 'boulder' and runs a development instance of the boulder server. The second is 'lehaproxy' and runs the client. To test if the machines are setup correctly, you can SSH into the 'lehaproxy' machine, by running ``vagrant ssh lehaproxy``. Next, go to the /lehaproxy directory and run ``./tests/boulder-integration.sh``. This runs a modified version of certbot's boulder-integration test, which tests the HAProxy plugin. If the test succeeds, your development environment is setup correctly. Development: Running locally without sudo ----------------------------------------- You can't run certbot without root privileges because it needs to access ``/etc/letsencrypt``, however you can tell it not to use ``/etc/`` and use some other path in your home directory. .. code:: bash mkdir ~/projects/certbot-haproxy/working mkdir ~/projects/certbot-haproxy/working/config mkdir ~/projects/certbot-haproxy/working/logs cat <> ~/.config/letsencrypt/cli.ini work-dir=~/projects/certbot-haproxy/working/ logs-dir=~/projects/certbot-haproxy/working/logs/ config-dir=~/projects/certbot-haproxy/working/config EOF Now you can run Certbot without root privileges. Further time savers during development.. ---------------------------------------- The following options can be saved in the ``cli.ini`` file for the following reasons. - ``agree-tos``: During each request for a certificate you need to agree to the terms of service of Let's Encrypt, automatically accept them every time. - ``no-self-upgrade``: Tell LE to not upgrade itself. Could be very annoying when stuff starts to suddenly break, that worked just fine before. - ``register-unsafely-without-email``: Tell LE that you don't want to be notified by e-mail when certificates are about to expire or when the TOS changes, if you don't you will need to enter a valid e-mail address for every test run. - ``text``: Disable the curses UI, and use the plain CLI version instead. - ``domain example.org``: Enter a default domain name to request a certificate for, so you don't have to specify it every time. - ``configurator certbot-haproxy:haproxy``: Test with the HAProxy plugin every time. .. code:: bash cat <> ~/.config/letsencrypt/cli.ini agree-tos=True no-self-upgrade=True register-unsafely-without-email=True text=True domain=example.org authenticator=certbot-haproxy:haproxy-authenticator installer=certbot-haproxy:haproxy-installer EOF Setuptools version conflict --------------------------- Most likely the ``python-setuptools`` version in your os's repositories is quite outdated. You will need to install a newer version, to do this you can run: .. code:: bash pip install --upgrade setuptools Since pip is part of ``python-setuptools``, you need to have it installed before you can update. Making a `.deb` debian package ------------------------------ Requirements: - python stdeb: pip install --upgrade stdeb - dh clean: apt-get install dh-make Run the following commands in your vagrant machine: ```bash apt-file update python setup.py sdist # py2dsc has a problem with vbox mounted folders mv dist/certbot-haproxy-.tar.gz ~ cd ~ py2dsc certbot-haproxy-.tar.gz cd deb_dist/certbot-haproxy- # NOTE: Not signed, no signed changes (with -uc and -us) # NOTE: Add the package to the ghtools repo dpkg-buildpackage -rfakeroot -uc -us ```